Emulex LightPulse LPe1105-M4 HBA Przewodnik Instalacji Strona 134
- Strona / 182
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
134
EMC Host Connectivity with Emulex FC HBAs and FCoE CNAs for the Linux Environment
Configuring a Boot Device on an EMC Storage Array
9. Press ESC to return to the Parameters menu.
10. Press ESC twice to return to the list of installed adapters.
Note: It is recommended, but not required, that the boot BIOS be
disabled on the other adapters in the system.
11. From the adapter list, select 1 for the adapter to be used for boot,
and press ENTER.
12. From the Options menu, select Option 1 - Configure Boot
Devices, and press ENTER.
13. The next screen displays a list of devices available for use as a
boot LUN. Initially, the values are set to 0. However, once the
information regarding the boot LUN is obtained, it is logged in
this field.
At the prompt, select the boot entry of 1. This entry will be used
to fill in the information regarding the target boot device.
14. On the next screen, select 00 to clear the selected priority slot, or
select the device from which the host will boot. Select the boot
device (for example, 01). This list also provides the LUN number
of the first LUN visible on that device.
15. The system prompts you to enter the boot LUN. Type the number
of the device from which the system will boot, and press ENTER.
16. A list of all available LUNs appears, beginning with the desired
boot LUN number. Type the two-digit number next to the desired
boot LUN, and press ENTER.
Note: On VNX series or CLARiiON systems, the desired boot LUN is 00.
On Symmetrix storage arrays, the LUN number of the first visible device
to that port should be used.
17. When prompted to select the option to boot via WWPN or DID,
select 1 for WWPN, and press ENTER.
18. Press
X to exit from the menu, and select y to reboot the system.
19. Reboot the host.
The HBA is now configured to boot from the desired LUN on the
VNX series or CLARiiON system.
- -508-435-1000 1
- Contents 3
- Emulex Driver 4
- Chapter 8 Additional Notes 6
- ◆ Linux operating environment 9
- ◆ Emulex adapters and drivers 9
- Courier italic 11
- Introduction 13
- Purpose of this document 14
- Host connectivity 14
- Boot device support 15
- Installation Steps 19
- Linux distribution of choice 21
- Summary of installation steps 22
- Installing the adapter 24
- Adapter edge connectors 28
- PCI Express slots 29
- PCI Express slots aligned 29
- Installing and 31
- Configuring the BIOS 31
- Settings 31
- LP1102 Emulex banner 32
- Updating the boot BIOS 33
- LP6DUTIL.EXE) 37
- LP6DUTIL.EXE program file 37
- 7.x driver) 38
- Installing and 43
- Configuring the Linux 43
- Host with the Emulex 43
- SLES 9, SLES 10, and SLES 11 52
- /sys filesystem 58
- ...Restoring 83
- Cleaning up 86
- ./hbanyware 86
- * If PEMC owerPath 88
- ◆ Miracle Linux v4.0 92
- ◆ RedFlag DC Server 5.0 92
- 4 and RHEL 5” on page 91 93
- Updating the Adapter 97
- Firmware 97
- FCoE adapters 102
- Connecting to the 109
- Planning procedure 110
- Enabling persistent binding 111
- Connecting to the Storage 112
- Editing /etc/modules.conf 114
- Network Settings window 117
- Configuring a Boot 121
- Device on an EMC 121
- Storage Array 121
- Limitations 124
- /dev/sda by the Linux 125
- Preparing the host 128
- CLARiiON 136
- Emulex v7.x-Series driver 138
- Application Kit 141
- Do you have a driver disk 142
- Driver Update OK 143
- Upgrading the Linux kernel 145
- Additional Notes 147
- Rebooting the host 151
- HPQ server-specific note 155
- Block device file names 157
- Red Hat distributions 158
- SuSE distributions 158
- PowerPath examples 159
- Character device file names 159
- Echoing the /proc filesystem 163
- Rescanning the SCSI bus 164
- Special Instructions 167
- For example: 170
- 3. Reboot the host 170
- • For SuSE distributions use: 173
- Example: 173
- 4. Reboot the host 173
- 2.1 Intel Itanium systems 178
- 3.0 Intel Itanium systems 179
Powiązane produkty i podręczniki dla Oprogramowanie Emulex LightPulse LPe1105-M4 HBA
Oprogramowanie Emulex LP21000 Instrukcja Użytkownika
(274 strony)
(274 strony)
Clay Paky PIPER I.C.C. manuels
Manuels d'utilisation et guides de l'utilisateur pour Projecteurs Clay Paky PIPER I.C.C..
Nous fournissons des manuels en pdf 5 Clay Paky PIPER I.C.C. à télécharger gratuitement par type de document : Manuel de l'utilisateur
Komentarze do niniejszej Instrukcji