Emulex 110 Instrukcja Użytkownika Pobierz pdf (Strona 61)

OneCommand Manager for VMware vCenter User Manual Page 56

3. Select the Diagnostics tab.

Figure 52: OneConnect Adapter Diagnostics tab

Use the Diagnostics tab to run these tests on OneConnect adapters installed in the system:

• PHY Loopback

• MAC Loopback

• TDR (OCe11XXX series adapters only)

Beaconing is supported remotely on hosts managed by the vCenter Server. Test results and the status of

running tests are time stamped and appear in the Test Status window.

OneConnect Loopback Tests

Run the following loopback tests:

• PHY Loopback - The PHY loopback test connects the transmit output of the physical layer to the

receive input of the physical layer. The data is transmitted, received and checked for data

miscompute errors.

• MAC Loopback - The MAC loopback test connects the transmit output of the MAC controller to

the receive input of the MAC controller (bypassing the PHY).

Error Action

There are two error action options in the event of a test failure:

• Stop Test - Does not log the error and aborts the test. No further tests are run.

• Ignore - Logs the error and proceeds with the next test cycle.

Test Cycles

Specify one of the following test cycles:

• Select an established cycle count by clicking on the corresponding radio button.

• Enter a custom cycle count in the blank field in the Test Cycles area.

• Set the test to run until you manually click Stop Test, by selecting the Infinite radio button.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 118 119

Brak uwag

Emulex 110 Instrukcja Użytkownika Strona 61