Emulex 110 Przewodnik Instalacji Pobierz pdf (Strona 43)

Booting from the external storage array

Installation and Configuration

11. Type 2 (Change PLOGI Retry Timer to 50 msec) and press Enter.

Setting a value of 50 msec allows more time for the login and

rescan functions to complete. A setting of 50 msec takes five to six

seconds per device found on the bus.

12. Press Esc twice to return to the main Emulex LightPulse BIOS

Utility screen (Figure 12 on page 40).

Note: If you have changed the topology or if BIOS not ready appears,

reboot the host and re-enter the BIOS to this point to continue.

13. Type 1 (Configure Boot Devices) and press Enter.

This displays a list of saved boot devices (Figure 18).

Figure 18 Saved boot devices

A list of up to eight boot devices, in order of preference, can be

saved in the adapter's BIOS utility. Initially, all entries should be

listed as Unused.

14. Type 1 to set the primary boot LUN, and press Enter.

This displays a screen similar to Figure 19 on page 44.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 239 240

Brak uwag

Emulex 110 Przewodnik Instalacji Strona 43